Оn determination of characteristics of two-stage shock-absorbers for mine cars
/ 0
- Details
- Category: Mechanization of mining production, mining machines and systems, mining mechanical engineering
- Last Updated on 24 September 2014
- Published on 25 December 2012
- Hits: 3506
Authors: A.A. Titov, V.F. Gankevich, A.N. Kotsupei, Yu.V. Vasilenko, L.A. Yakubovich.
The design procedure of the rigidity of spring elements of two-stage spring shock-absorber for mining cars is presented. The calculation scheme, taking into account step-by-step contact of two-stage shock-absorber springs, has been developed. The gap between the springs eliminates only when mine car is filled with material. The influence of such factors, as the mass ratio of loaded and empty main car and the height of rail joint on the ratio of rigidity values for springs of the first and the second stages have been shown.
Files:
 2010_05 Titov
|
|
 2012-12-14  266.19 KB  1223 |
|
Newer news items:
- Development of device for treatment of vuggy area of bore hole - 25/12/2012 16:08
- Utilization of energy plant hot water heat by means of steam-water turbines - 25/12/2012 16:07
- The substantiation of sieves oscillations parameters of polyfrequency vibrating screens - 25/12/2012 16:04
- Basic grades of structural carbon steels used for car production and repair - 25/12/2012 16:03
- Signs of transition of locomotive in skidding while braking by devices with limited friction moment on wheel - 25/12/2012 16:02
- Prospects for development of vertical joints of deep-water pipes of large diameter (reiser). Working out of requirements to trumpet joints - 25/12/2012 16:01
Archive