Науковий вісник НГУ

Study on explosion in different cross-sectional shape charge cavity in tensile stress field

• 
• 

User Rating:  / 0

PoorBest 

Details

Category: Content №3 2023

Last Updated on 27 June 2023

Published on 30 November -0001

Hits: 2113

Authors:

O. K. Ishchenko*, orcid.org/0000-0003-2449-5258, Dnipro University of Technology, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

* Corresponding author e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

повний текст / full article

Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2023, (3): 032 - 038

https://doi.org/10.33271/nvngu/2023-3/032

Abstract:

Purpose. To study nature and patterns of main cracks development in a solid medium during an explosion of explosive charge in charge cavity with longitudinal symmetrical incision and various cross-sectional shapes

Methodology. Experimental methods were used to study process dynamics, nature and direction of cracks development during the explosion of explosive charge of various shapes and their transformation into a clear optical image under the influence of a focused laser beam through an optical system – the method of caustics. Study on stress field changes under the combined effect of static and dynamic loading on fracture medium by polarisation-optical method. Based on correlation analysis methods, study results are analysed.

Findings. It is experimentally proved that changing angle from 0 to 45° between longitudinal cut and plane jointly affected by tensile stresses and explosion action promotes opening of main cracks both parallel and perpendicular to cut direction. Dependences of propagation of main cracks caused by an explosion in model under different loading conditions are constructed. Calculations of stress intensity coefficients in medium under explosion and tensile stresses were performed.

Originality. Improved research methodology for establishing the mechanism of explosive loading of solid media by explosion of explosive charge of different cross-sectional shapes is proposed. Physical mechanism of main cracks formation and propagation in blast cavity under action of explosive charge of different shapes under different conditions of dynamic loading is revealed. Dimensions of symmetrical longitudinal incision and spatial location of crack along direction of tensile stresses are substantiated. Also, an idea of using a directed explosion to form a protective strip in the rock mass was further developed.

Practical value. The research results received can be necessary for developing new technical solutions to provide additional protective measures in the field of environmental and seismic safety of protected civil and industrial facilities during blasting operations in quarries and mines.

Keywords: borehole, explosion, solid medium, caustic method, crack, tensile stress

References.

1.Ge, S., Zhong, M. S., Wang, M., Long, Y., Liu, Y., & Xu, J. L. (2019). Collapse process and impact effect of viaduct demolition based on centrifugal model. Soil Dynamics and Earthquake Engineering, 115, 246-251. https://doi.org/10.1016/j.soildyn. 2018. 07.034.

2. Nesterova, Y. S. (2017). Experience of destressing slotting to prevent gasdynamic events in mechanized carnallite mining. Journal of Mining Science, 53(2), 291-298. https://doi.org/10.1134/S1062739117 02214X.

3. Wang, Y. B. (2017). Study of the dynamic fracture effect using slotted cartridge decoupling charge blasting. International Journal of Rock Mechanics and Mining Sciences, 96, 34-46. https://doi.org/10.1016/j.ijrmms.2017.04.015.

4. Lisjak, A., Figi, D., & Grasselli, G. (2014). Fracture development around deep underground excavations: Insights from FDEM modelling. Journal of Rock Mechanics and Geotechnical Engineering, 493-505. https://doi.org/10.1016/j.jrmge.2014.09.003.

5. Vazaios, I., Vlachopoulos, N., & Diederichs, M. S. (2019). Assessing fracturing mechanisms and evolution of excavation damaged zone of tunnels in interlocked rock masses at high stresses using a finitediscrete element approach. Journal of Rock Mechanics and Geotechnical Engineering, 11(1), 12-37. https://doi.org/10.1016/j.jrmge.2018..06.007.

6. Milner, D., Wesevich, J., Nikodym, L., Nasri, V., Lawver, D., & Mould, J. (2018). Improved blast capacity of pre-engineered metal buildings using coupled CFD and FEA modeling. Journal of Loss Prevention in the Process Industries, 56, 486-497. https://doi.org/10.1016/j.jlp.2018.10.008.

7. Ishchenko, К. S., Krukovskaya, V. V., Коnoval, S. V, Kratkov­skij, I. L., & Krukovskij, A. P. (2015). Simulation and numerical solution of the problem of stress field distribution in a rock mass from the explosion of an explosive charge of various shapes. Izvestiya VUZov “Gornyj zhurnal”, 6, 28-34.

8. Ishchenko, К. S., Коnoval, S. V., Kratkovskij, I. L., Krukov­skaya, V. V., & Krukovskij, A. P. (2015). Features of the destruction of solid media by explosive charges of various shapes. Izvestiya VUZov “Gornyj zhurnal”, 5, 93-101.

9. Kaminskij, A. A., & Kurchakov, E. E. (2018). On the evolution of the pre-fracture zone at the crack tip in a nonlinear anisotropic body. Reports NAN of Ukraine, 10, 44-55. https://doi.org/10.15407/dopovidi2018.10.044.

10. Kaminskij, A. A., & Kurchakov, E. E. (2019). On the transformation of the boundaries of passive deformation in a nonlinear elastic anisotropic body with a crack. Reports NAN of Ukraine, 9, 20-33. https: //doi.org/10.15407/dopovidi 2019. 09. 020.

11. Kim, J. G., & Song, J. J. (2015). Abrasive water jet cutting methods for reducing blast-induced ground vibration in tunnel excavation. International Journal of Rock Mechanics and Mining Sciences, 75,147-158. https://doi.org/10.1016/j.ijrmms. 2014.12.011.

12. Stockwell, M., & Tadic, D. (2010). Blasthole slotting: Reducing over breakage during coal mine blasting. Australian Mining Technology Conference: Technology Changing the Mining Business Footprint. CRC Mining.

13. Liu, C. W., Lu, Y. Y., Xia, B. W., & Yu, P. (2019). Directional fracturing by slotting-blasting-caused stress wave form changes. International Journal of Impact Engineering, 129, 141-151. https://doi.org/10.1016/j.ijimpeng.2019.02.002.

14. Yang, G. L., Yang, R. S., Huo, C., & Pan, C. C. (2010). Research of Influence Factors of Initial Crack with Slotted Charge Blasting. Advanced Materials Research, 143-144, 797-801. https://doi.org/10.4028/www.scientific.net/AMR.143-144.797.

15. Dammyr, O., Nilsen, B., & Gollegger, J. (2017). Feasibility of tunnel boring through weakness zones in deep Norwegian subsea tunnels. Tunnelling and Underground Space Technology, 69, 133-146. https://doi.org/10.1016/j.tust.2017.06.012.

16. Yang, R. S., Ding, C. X., Li, Y. L., Yang, L. Y., & Zhao, Y. (2019). Crack propagation behavior in slit charge blasting under high static stress conditions. International Journal of Rock Mechanics and Mining Sciences, 119, 117-123. https://doi.org/10. 1007/ s10064019-01665-1.

17. Konicek, P., Soucek, K., Stas, L., & Singh, R. (2013). Long-hole distress blasting for rock-burst control during deep underground coal mining. International Journal of Rock Mechanics & Mining Sciences, 61, 141-153. https://doi.org/10.1016/j. ijrmms. 2013.02.001.

18. Drover, C., Villaescusa, E., & Onederra, I. (2018). Face destressing blast design for hard rock tunnelling at great depth. Tunnelling and Underground Space Technology, 80, 257-268. https://doi.org/10.1016/j.tust.2018.06.021.

19. Xie, L. X., Lu, W. B., Zhang, Q. B., Jiang, Q. H., Chen, M., & Zhao, J. (2017). Analysis of damage mechanisms and optimization of cut blasting design under high in-situ stresses. Tunnelling and Underground Space Technology, 66, 19-33. https://doi.org/10.1016/j.tust.2017.03.009.

20. Reddy, S. K., & Sastry, V. R. (2016). Stress Distribution on Blasting Gallery Barrier Pillar due to Goaf Formation During Extraction. Journal of the Institution of Engineers, Ser. D, 97(2), 205-213. https://doi.org/10.1007/s40033-015-0090-8.

21. Nosov, P. A., Pakhomov, I. I., & Shirankov, A. F. (2012). State and prospects for the development of methods for calculating the conversion of laser radiation by optical systems. Vestnik MGTU im. N.E. Baumana. Ser. “Priborostroenie”, 167-177.

22. Paluszny, A., & Zimmerman, R. W. (2017). Modelling of primary fragmentation in block caving mines using a finite-element based fracture mechanics approach. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 3, 121-130. https://doi.org/10.1007/s40948-016-0048-9.

23. Yang, L., Xie, H., Huang, C., Zhang, D., & Chao, Y. J. (2020). Experimental Study on Notched Directional Blasting in Tensile Stress Field. Journal of Engineering Science and Technology Review, 13(1), 06-113. https://doi.org/10.25103/jestr.131.14.

24. Kyrychenko, O. L., Kulivar, V. V., Skobenko, O. V., & Khalymendyk, O. V. (2019). A technique to measure V.V. sensitivity of explosivesto the effect of laser pulse radiation. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (4), 11-15. https://doi.org/10.29202/nvngu/2019-4/2.

• < Prev
• Next >