Criterion to select rational parameters of supports to reduce expenditures connected with construction and maintenance of development working

User Rating:  / 0
PoorBest 

Authors:

O.V.Solodyankin, Dr. Sc. (Tech.), Prof., State Higher Educational Institution “National Mining University”, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.

O.Y.Hryhoriev, Cand. Sc. (Tech.), Assoc. Prof., State Higher Educational Institution “National Mining University”, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.

I.V.Dudka, Cand. Sc. (Tech.), State Higher Educational Institution “National Mining University”, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.

S.V.Mashurka, State Higher Educational Institution “National Mining University”, Dnipro, Ukraine, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.; This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract:

Purpose. Substantiation of the parameter allowing predicting cost of mine working construction and maintenance under certain mining conditions taking into account a type of the mine working support, its parameters, repair size and cost as well as lifetime.

Methodology. Methods for generalization and comparative analysis, processing of underground investigation data, mathematical (numerical) modeling of geomechanical processes, and evaluation of economic efficiency have been applied.

Findings. Methodology to determine total costs for construction and maintenance of an extended mine working has been substantiated. A parameter of a mine working repairability has been proposed. The parameter considers intensity of rock contour displacements and cost of repair operations resulting from critical displacements of roof and floor. The repairability parameter has been used to substantiate the criterion allowing selecting rational support parameters to cut total costs for a mine working operation. A complex of field and numerical studies has been performed for Pivdennodonbaska No. 1 Mine. That made it possible to determine regularities of deformation processes within rock mass around mine working with frame support, and frame and roof bolting.

Originality. Innovative numerical model of geomechanical “mine working support-rock mass” system for Pivdennodonbaska No. 1 mine has been developed. The model allows studying deformation processes connected with floor rock heaving and its dinting in the context of different stages of a mine working operation. Regularities of “mine working support-mass” geomechanical system deformation have been determined making it possible to substantiate rational parameters for maintenance of mine workings to reduce repair cost at Pivdennodonbaska No. 1 mine. A parameter of a mine working repairability has been proposed taking into consideration the intensity of rock contour displacements and repair cost as well as the criterion helping select rational support parameters.

Practical value. Methodology to determine total cost of construction and maintenance of extended mine working can be used for designing rational support systems and selecting ways to improve stability of mine workings.

References

1. Gapieiev, S.N., Hoziaikіna, N.V., Tereshchuk, R.N. and Kovalenko, V.V., 2016. Resource management technology stability of development workings of coal mines. Dnipropetrovsk: NMU.

2. Shashenko, A.N., Kravchenko, K.V., Prokudin A.Z. and Smirnov, A.V., 2015. Method of solving the task of workings stability with combined support ASN-A. Journal of National University of Kryvyi Rih, 39, pp. 24‒28.

3. Martovitski, A.V., 2012. Ground of directions of increase stability of mine workings of Private Stock Compani “DTEK Pavlogradugol”. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 3, pp. 45‒53.

4. Storchak, G.G., Korol, А.Y. and Gapieiev, S.N., 2013. The issue of increasing the stability of discontinuous workings with metal support under the conditions of irregular loading. Up-to-date resource- and energy- saving technologies in mining industry. – Research and practice journal: Kremenchuk M. Ostrohradskyi National University: Kremenchuk: KrNU,  1(11), pp. 143‒152.

5. Solodyankin, A.V., Grigoriev, А.Е., Khalimendik, A.V. and Mashurka S.V.,2015. Underground investigations of geomechanical processes in the neighbourhood of areal mine workings of SE “Shakhtoupravlenie “Yuzhnodonbasskoe № 1”, Geotechnical mechanics, 123, pp. 87‒98.

6. Shashenko, A.N., Solodiankin, A.V. and Smirnov, A.V., 2015. Floor rock heaving within coal mine workings. Dnipropetrovsk: LizunovPress.

7. Smirnov, A.V. and Korol, А.Y., 2015. Numerical modeling of the floor rock heaving in coal mines. Mining informational and analytical bulletin, 7, pp. 298‒ 305.

8. Sdvyzhkova, О.О., Babets, D.V., Kravchenko, K.V. and Smirnov, A.V., 2016. Determining the displacements of rock mass nearby the dismantling chamber under effect of plow longwall. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 2, pp. 34‒42.

9. Sdvyzhkova, O.O., Babets, D.V. and Smirnov, A.V., 2014. Support loading of assembly chamber in terms of Western Donbas plough longwall. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 5, pp. 26‒32.

10. Phase2. Finite Element Analysis for Excavations and Slopes. version 8.0 [online] Available at: https://www.rocscience.com/products/3/Phase2.

Files:
02_2017_Solodyankin
Date 2017-05-21 Filesize 4.73 MB Download 697

Visitors

6235479
Today
This Month
All days
9311
62156
6235479

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home Home EngCat Archive 2017 Contents No.2 2017 Mining Criterion to select rational parameters of supports to reduce expenditures connected with construction and maintenance of development working