- 1. Basics of calculation of a two-circuit air purification system for polydisperse dust
- (Content №2 2024)
- ... 3. Stalinskii, D. V., Mantula, V. D., Pirogov, A. Y., Shaparenko, A. V., & Shvets, M. N. (2016). Reconstruction of gas-purification system and ladle–furnace unit at PAO Severstal’. Steel in Translation, 46(2), ...
- Created on 01 May 2024
- 2. Influence of hot plastic deformation on properties of the carbon steel
- (Content №2 2024)
- ... Hirnychoho Universytetu. 2024, (2): 045 - 051 https://doi.org/10.33271/nvngu/2024-2/045 Abstract: Purpose. Determination of the influence of hot plastic deformation degree on the set of carbon steel ...
- Created on 01 May 2024
- 3. Container technology for transporting rock masses in quarries
- (Content №2 2024)
- ... Harkiv: NUTsZU. ISBN 978-617-7722-70-9. 21. STEELBRO Sidelifter – Container Handling Applications (2012). Retrieved from https://www.youtube.com/watch?v=sprHVr8uG9c. 22. HD785-7. Retrieved from https://komatsupoland.pl/katalog-produktow/wozidla/wozidla-sztywnoramowe/hd785-7. ...
- Created on 01 May 2024
- 4. Improvement of the method of time rationing for assembling car groups on one track
- (Content №1 2024)
- ... of Surface Preparation and Painting Processes for Railway and Automotive Steel Sheets. Infrastructures, 8(2), 28. https://doi.org/10.3390/infrastructures8020028. 3. Kou, L., Sysyn, M., Fischer, S., Liu, ...
- Created on 29 February 2024
- 5. A methodological approach to assessing the durability of welded structures of screens using SolidWorks Simulation software
- (Content №6 2023)
- ... 5. Iqbal, N., Fang, H., Naseem, A., Muhammad Kashif, M., & De Backer, H. (2020). A Numerical Evaluation of Structural Hot-Spot Stress Methods in Rib-To-Deck Joint of Orthotropic Steel Deck. Department ...
- Created on 23 December 2023
- 6. Managing the process of underground coal gasification
- (Content №6 2023)
- ... & Burshukova, G. A. (2021). Study of vibration properties of ceramic-metal nanostructural tin-cu coatings with different copper content 7 and 14 at.% on chromium-nickel-vanadium steels. News of the ...
- Created on 23 December 2023
- 7. Utilization of the secondary resources of titanium-zirconium pits when constructing highways
- (Content №4 2023)
- ... Aziz, M. M. A. (2014). Characteristics and utilization of steel slag in road construction. Jurnal Teknologi, 70(7). https://doi.org/10.11113/jt.v70.3591. 16. Hryhorak, M. Yu., Dzwigol, H., Kwilinski, ...
- Created on 28 August 2023
- 8. Improvement of the service life of mining and industrial equipment by using friction modifiers
- (Content №4 2023)
- ... 293-296). CRC Press. https://doi.org/10.1201/b17547. 6. Suslov, A. G., & Shalygin, M. G. (2019). A wear model for subrough surface contacts of martensitic steels. Journal of Engineering Tribology, ...
- Created on 28 August 2023
- 9. Analysis of motivation determinants in the implementation of online training of future managers at state universities
- (Content №3 2023)
- ... 9. Alsabawy, A. Y., Cater-Steel, A., & Soar, J. (2013). IT infrastructure services as a requirement for e-learning system success. Computers & Education, 69, 431-451. https://doi.org/10.1016/j.compedu.2013.07.035. ...
- Created on 27 June 2023
- 10. Long-term thermal productivity of polystyrene concrete in a new composite wall in a fixed formwork
- (Content №3 2023)
- ... wall made of expanded polystyrene concrete in a fixed formwork using light steel thin-walled structures has been created. A methodology for researching the long-term thermal productivity of this composite ...
- Created on 27 June 2023
- 11. Microstructures and mechanical properties of cold rolled pipes with increased small deformation
- (Content №3 2023)
- ... on modern industrial equipment using modern devices. The study was conducted when rolling pipes made of steel 08Cr18Mn10Ti on the CRP 6-20 mills. Rolling route is often 25 × 2.5 mm ® 16 × 1.5 mm, ...
- Created on 27 June 2023
- 12. Determination of steel arch support distance for roadways under the open-pit mine: a case study at the Mong Duong Coal Mine (Vietnam)
- (Content №3 2023)
- ... Nowadays, in Quang Ninh coalfield, the mining activity in quarries is increasing. For this purpose, mine roadways are dug and supported. After the mine roadways are dug, they are mainly supported by steel ...
- Created on 27 June 2023
- 13. Increasing the efficiency of using backline and private railway infrastructure in the conditions of the transportation market
- (Content №2 2023)
- ... S. (2023). Optimization of Surface Preparation and Painting Processes for Railway and Automotive Steel Sheets. Infrastructures 2023, 8(2), 28. https://doi.org/10.3390/infrastructures8020028. 14. Taran, ...
- Created on 28 April 2023
- 14. Graphitizing modification of the axial zone of cast iron rolling rolls in the liquidus-solidus temperature range
- (Content №1 2023)
- ... 7. Kostryzhev, A. G., Slater, C. D., Marenych, O. O., & Davis, C. L. (2016). Effect of solidification rate on microstructure evolution in dual phase microalloyed steel. Scientific Reports, 6, 1-7. ...
- Created on 25 February 2023
- 15. Geomechanical substantiation of parameters for safe completion of mining the coal reserves adjacent to main workings
- (Content №1 2023)
- ... model for simulating deformation mechanism of steel frame support set by actual profile. Mining of Mineral Deposits, 10(1), 57-62. https://doi.org/10.15407/mining10.01.057. 5. Matayev, A., Abdiev, A., ...
- Created on 25 February 2023
- 16. Predicting underground mining impact on the earth’s surface
- (Content №1 2023)
- ... of the stress-strain state of a rock mass during the extraction of hard coal at the mine named after Kostenko, owned by one of the world’s leading steel producers, JSC ArcelorMittal. For modeling, a site ...
- Created on 25 February 2023
- 17. Heavy metals removal using natural zeolite adsorption from Tigris river water at Samarra city (Iraq)
- (Content №6 2022)
- ... A.K., & Parikh, P.A. (2013). Corrosion inhibition effectiveness of zeolite ZSM-5 coating on mild steel against various organic acids and its antimicrobial activity. Journal of Industrial and Engineering ...
- Created on 25 December 2022
- 18. Determination of the deformation parameters of the steel reinforcing phase inside the aluminum matrix during hot rolling
- (Content №6 2022)
- ... Abstract: Purpose. Comparison of deformation parameters during rolling of reinforced composites based on aluminum alloy using braided and expanded steel meshes as a reinforcing phase. ...
- Created on 25 December 2022
- 19. Minimization of dynamic changes in the tension of long products behind the outlet cage in rolling stock production in coils
- (Content №6 2022)
- ... research was based on a complex model of the process of rolled steel winding with a Garrett-type winder and the tension of rolled steel in the area of the exit cage-winder. To control the actual amount ...
- Created on 25 December 2022
- 20. Taxonomy on the production processes and characterization of powder metallurgy used in additive manufacturing process
- (Content №6 2022)
- ... 6. Li, R., Liu, J., Shi, Y., Du, M., & Xie, Z. (2010). 316L stainless steel with gradient porosity fabricated by selective laser melting. Journal of Materials Engineering and Performance, 19(5), 666-671. ...
- Created on 25 December 2022