A preliminary study on Anini deposit iron ore enrichment in order to use it in metallurgical industry (Algeria)

User Rating:  / 0
PoorBest 

Authors:

R. Chaabia, Badji Mokhtar University (UBMA), Annaba, Algeria.

M. Bounouala, Professor, Badji Mokhtar University (UBMA), Director of Mineral Processing and Environment Laboratory; Head of the Scientific Committee of Mining Department, Annaba, Algeria.

M.L. Boukelloul, Professor, Badji Mokhtar University (UBMA), Deputy Head of the Mining Department in Charge of Pedagogy, Annaba, Algeria.

Abstract:

Purpose. The study of iron ore from the Anini opencast mine aimed to develop its mineral resources for use in the metallurgical industry by ArcelorMittal Annaba (Algeria). The chemical, mineralogical and particle size analysis of representative samples showed that the studied ore is of the hematite type of clay-siliceous gangue. The preliminary enrichment was carried out based on specific properties of the iron ore.

Methodology. The characterization of the ore was carried out based on the sample analysis by means of X-ray diffractometer (XRD), reflected light optical microscope, and scanning electron microscope of type SEM 7001F. The preliminary mineral processing tests were carried out in a washing apparatus with the aim of removing the argillaceous gangue from the external surface of iron ore particles.

Findings. A grain size analysis carried out on Ro-tap screening machine with a sample of 500g crushed to 5 mm particle size showed that the release mesh of iron minerals is at about 0.5 mm. Iron content is in average > 50%. Its weight in the output makes 70% of the total mass of the sample. The tests on preliminary mineral processing by washing showed encouraging results regarding iron content and recovery.

Originality. The originality of this research consists in the application of the washing process to clean external surface of iron ore particles of the argillaceous gangue. The process suggested is inexpensive and very effective. The cost of a ton of the rich ore is low.

Practical value. Industrial application of washing method is very practical and simple-to-use. Light particles come to the top and heavy particles of iron sediment. The argillaceous gangue can be utilized in cement factories.

References:

1. Olivier, D. (2012), “Minerai de fer, l’émergence d’une nouvelle commodité sur les marchés financiers”, Haute École de Gestion de Genève (HEG-GE), pp. 57.

2. Ghamoud, K. (2009), “Audit environnemental de la carrière de djebel Anini FERPHOS”, Bureau d’Etudes Géologiques & Minières, Rapport inédit, pp. 51.

3. Upadhyay, R.K. and Venkatesh, A.S. (2006), “Current strategies and future challenges on exploration, beneficiation and value addition of iron ore resources with special emphasis on iron ores from eastern India”, Applied Earth Science IMM Transactions Section B, vol. 115, pp. 187–195.

4. Subrata, R. (2009), “Recovery improvement of fine iron ore particles by multi gravity separation”, The Open Mineral Processing Journal, no.2, pp. 17–30.

5. Das, B., Mohapatra, B.K., Reddy, P.S.R., and Das, S. (1995), “Characterization and beneficiation of iron ore slimes for further processing”, Powder Handling and Process, no.7(1), pp. 41–44.

6. Jena, S.K., Sahoo, H., Rath, S.S., Rao, D.S., Das, S.K. and Das, B. (2015), “Characterization and Processing of Iron Ore Slimes for Recovery of Iron Values”, Mineral Processing and Extractive Metallurgy Review, no.36:3, pp. 174–182.

7. Mohanty, S. and Das, B. (2010), “Optimization studies of hydrocyclone for beneficiation of iron ore slimes”, Mineral Processing & Extractive Metall, no. 31:2, pp. 86–96.

8. Gujraj, B., Sharma, J.P., Baldawa, A., Arora, S., Prasad, N. and Biswas, A.K. (1983), “Dispersion-flocculation studies on hematite-clay systems”, International Journal of Mineral Processing, vol. 11, pp. 285–302.

9. Mahiuddin, S., Bandopadhyay, S. and Baruah, J.N. (1989), “A study on the beneficiation of Indian iron ore fines and slime using chemical additives”, International Journal of Mineral Processing, vol.11, pp. 285–302.

10. Jan, D. and Douglas, W.F. (2014), “Selective flocculation of hematite in quartz–hematite–ferricion–polyacrylic acid system, Part 2, Effect of grinding and a hydrofluoric treatment on selectivity of flocculation”, International Journal of Mineral Processing, vol. 129, pp. 1–5.

11. Mouna, C. (2011), “Synthèse de gels phosphocalciques issus de déchets industriels carbonatés Caractérisation physico-chimique, thermique et rhéologique”, Thèse de doctorat, université de Toulouse, pp. 170.

 

12. Maryam, S., Claude, B. and Marilène, R. (2014), “Effect of wash water on the mineral size recovery curves in a spiral concentrator used for iron ore processing”. International Journal of Mineral Processing, no.129, pp. 22–26. 

Files:
2015_04_chaabia
Date 2015-11-03 Filesize 1.14 MB Download 995

Visitors

6231642
Today
This Month
All days
5474
58319
6231642

Guest Book

If you have questions, comments or suggestions, you can write them in our "Guest Book"

Registration data

ISSN (print) 2071-2227,
ISSN (online) 2223-2362.
Journal was registered by Ministry of Justice of Ukraine.
Registration number КВ No.17742-6592PR dated April 27, 2011.

Contacts

D.Yavornytskyi ave.,19, pavilion 3, room 24-а, Dnipro, 49005
Tel.: +38 (056) 746 32 79.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
You are here: Home Archive by field of science Physical processes A preliminary study on Anini deposit iron ore enrichment in order to use it in metallurgical industry (Algeria)